EBay Demand valve deal!

[Racer1_NC]

Ok folks.....I can't take credit for finding the following and it was so cheap I thought it was a scam. So.....I ordered one before spreading the word. It came today and appears to be legit. Demand valve and hose for $50 US. Brand new, in the box.

Ebay Link

[jon019]

...AWE-SOME Racer!...and you put your $ where your mouth is  THANK YOU...

...decades ago my dream was one day to be able to afford a demand valve...they were ridiculously high...this, just wow!

...Simon's then the optimask did serve well with the right regulator ...so i made do...

[FunTimes]

Nice find!

[SSCCluster]

Hi everyone 1st time poster.

I have 3 M tanks being delivered this week and I am struggling to find a regulator to connect to these demand valves.

Can anyone suggest one please?

 I’m going through my worst cluster of my life and I’m struggling.  Psilocybin is too complex for me and I’m trying the vitamin d but have been a pin cushion for Zembrace.

Any guidance you can provide on the correct regulator I’d be so grateful.

Thank you 

[Racer1_NC]

Usually Amazon has some, but it appears that right now that none are available there. You can configure one with a DISS fitting at WT Farley Here.

E tanks regs are easier to source. I've also found an adapter that may work but am waiting on the proper seal to make sure its something i can recommend. 

There may be others but ATM I can't locate any. Ill keep my eyes open.

[SSCCluster]

7 hours ago, Racer1_NC said:

Usually Amazon has some, but it appears that right now that none are available there. You can configure one with a DISS fitting at WT Farley Here.

E tanks regs are easier to source. I've also found an adapter that may work but am waiting on the proper seal to make sure its something i can recommend. 

There may be others but ATM I can't locate any. Ill keep my eyes open.

Hi Racer.

Ive sourced the tanks and will have 3 M tanks.  If I use that link and order that 25lpm and DISS fitting that will be what I need as far as regulator and demand valve ?  

I’m sorry for dumb questions I’m just really going through it right now with this cluster and want ensure I have what I need.

i ordered the optimask as well so all set there.

 I’m hoping it’s all self explanatory to setup once I have all the parts.  If you clarify my last question I’ll pull trigger on regulator you linked above/

Thank you so much,

SSC

 

[Racer1_NC]

 

6 hours ago, SSCCluster said:

Ive sourced the tanks and will have 3 M tanks.  If I use that link and order that 25lpm and DISS fitting that will be what I need as far as regulator and demand valve ?  

 

I think I have found a better deal for you. HERE  

This option will give you what you need plus a barb fitting for the mask as well so you can use either.

Glad to help.

[SSCCluster]

1 hour ago, Racer1_NC said:

 

I think I have found a better deal for you. HERE  

This option will give you what you need plus a barb fitting for the mask as well so you can use either.

Glad to help.

You are a life saver.  I ordered this.  I have checked is there any reference to how I connect my cluster mask, demand valve and this new regulator all together to tank.

oxygen supplier is sending crap mask and 15lpm regulator so I want to be able assemble everything to use.

 I’m so desperate to get off so much Zembrace and start the oxygen. 
 

I’m getting killed in this cluster.  10 years I’ve had them and this is by far the worst.  About 6 weeks now and they want send me DHE or Lithium next and I’m resistant to trying the lithium.  
 

Also about 5 days on D3 regimen 

[Racer1_NC]

I'm attaching a pic to illustrate parts of the regulator. When you turn the M tank on, the demand valve will be charged and ready to use. The mask flow control has no effect on the demand valve. You will leave it on "0" unless you use the O2 mask rather than the demand valve.

You will need an adjustable wrench of sufficient size to attach the regulator to the tank and the demand valve to the regulator. Ensure the tank valve is closed before swapping regulators.

[SSCCluster]

2 hours ago, Racer1_NC said:

I'm attaching a pic to illustrate parts of the regulator. When you turn the M tank on, the demand valve will be charged and ready to use. The mask flow control has no effect on the demand valve. You will leave it on "0" unless you use the O2 mask rather than the demand valve.

You will need an adjustable wrench of sufficient size to attach the regulator to the tank and the demand valve to the regulator. Ensure the tank valve is closed before swapping regulators.

Thank you SO MUCH.